|
Aluminum alloy doors and windows profiles specifications aluminum alloy doors and windows of the classification
Doors and windows aluminum alloy profiles are basically no national standard non-standard, but the state of the building aluminum has a special industry norms, mainly on the thickness of the profile, material and so on to make the request.
Each aluminum alloy production enterprises produced by the product is basically the same, but in the specific structure of the access. But like the more common series, such as GB 50,868,90, these are basically the same.
80 series, 60 series refers to the aluminum alloy frame frame width is 80 mm, 60 mm.
According to the profile of the extrusion process, basically can be divided into oxidation, electrophoresis, electrostatic powder coating, fluorocarbon spraying, wood grain transfer of these kinds, that is different coating methods. At present the market consumption of 85% for the electrostatic powder coating profiles, that is, color aluminum.
There are 70 series and 90 series of push and pull aluminum alloy door, the basic height of the door has 2100,2400,2700,3000mm, the basic door width of 1500,1800,2100,2700,3000,3300,3600mm. Push-pull aluminum window has 55 series, 60 series, 70 series, 90 series, 90 a I series. The basic window hole height of 900,1200,1400,1500,1800,2100mm; basic window hole width of 1200,1500,1800,2100,2400,2700,3000mm.
Flat aluminum alloy door has 50 series, 55 series, 70 series. The basic door height is 2100, 2400, 2700mm, the basic door width is 800,900,1200, 1500,1800mm. Flat open aluminum window has 40 series, 50 series, 70 series. Basic window hole height of 600,900,1200,1400,1500,1800, 2100mm; basic window hole width of 600,900,1200,1500,1800,2100mm.
Aluminum alloy to the spring door has 70 series, 100 series. The basic door height is 2100, 2400, 2700, 3000, 3300mm, the basic door width is 900,1000,1500,1800,2400,3000,3300,3600mm.
Aluminum alloy surface anodized film color silver-white, bronze.
Glass varieties can be used ordinary flat glass, float glass, laminated glass, tempered glass, insulating glass. The glass thickness is typically 5 mm or 6 mm.
Aluminum doors and windows surface quality requirements:
1. Door and window surface should not have obvious abrasions, scratches, bumps and other defects.
2. doors and windows adjacent rod coloring surface should not have significant color.
3. The windows and doors should not have aluminum crumbs, burrs, oil spots or other stains. There should be no spillage of the adhesive at the connection.
|
